It is made from Solid CNC machined 6061 Billet w/ Black Anodized finish. For the serious shooter on a tight budget. This spacer is for the guy who already owns a 9mm buffer like the one offered by RRA or Colt and doesn't want to replace it with another $60-$90 custom buffer. The ST-9BS is designed to limit the travel of your 9mm bolt. The 9mm cartridge isn't near the length of a 223/5.56 cartridge so it doesn't need the same amount travel. You are just wasting energy and creating more wear and tear on your expensive 9mm AR15. It helps eliminate the chance of breaking bolt catches. With the spacer installed your bolt doesn't have a running head start to slam into the back of your bolt catch and break it off or damage your lower receiver. It also makes for a much smoother shooting gun. The less distance the bolt has to travel means you are going to have quicker follow up shots. The ST-9BS also increases spring pressure, which means a little less gas in your face and more out of the muzzle. To Install the ST-9BS spacer you Simply remove your buffer and spring. Install the ST-9BS on the end of your spring like you would with a buffer. Drop the complete unit "ST-9BS, Buffer Spring, and Buffer" into the buffer tube and start shooting again. The ST-9BS is ONLY compatible with 9mm! The ST-9BS will go Perfect with the ST-T2 tungsten buffers we offer but is NOT compatible with the ST-9X or ANY other extended 9mm buffers on the Market.
Showing reviews 1-10 of 14 | Next
Posted by H.Rose on 11th Jun 2017
Well built works fine in my Glock Lower
Posted by H.Rose on 11th Mar 2017
Have not used it yet in the process of putting the lower together !
Posted by Unknown on 15th Feb 2017
Took all the bolt slap/clunk out of my 9mm ar. Much quicker back on target. Works as advertised.
Posted by moore on 23rd Mar 2016
Received a 9mm specific buffer spacer in just a few days. Was exactly as promoted and has exceeded my expectations in both fit and function.
Posted by Marv on 4th Mar 2016
I built a 9mm AR with a CMMG BCG and CMMG heavy buffer. I knew about the BCG overtravel breaking bolt catches but the CMMG information on the heavy buffer said you wouldn't need a spacer using their buffer. After 300 rds I bent (not broken yet) the bolt catch. Most bolt catches are at least $10 so buy the spacer for $15 and save the replacement of your bolt catch before it breaks or bends.
Posted by Sean Thompson on 16th Jul 2015
Installed in dedicated 9mm build paired with standard length 9mm heavy buffer and dedicated hold open mag well block. Works perfectly. Only allows bolt to travel just past homd open to minimize wear on parts. Very pleased with purchase. ST.
Posted by Navy5337 on 6th Apr 2015
Works as advertised and we'll made. Fantastic service from 9mm AR
Posted by Daniel on 20th Mar 2015
Highly recommended if you are using the spikes 9mm ST-T2 buffer. Does its job as intended. Well worth the money spent!
Posted by andrew on 6th Mar 2015
No so good here. I found that the 'spacer' part is fine, BUT - the 'nub' that the spring seats on is too long. The 'bumper' on the heavy buffer would contact the spacer before the bolt would get beyond the bolt catch, therfore, the bolt would not 'hold open' after last round.
And - when I get around to cutting off about half of the "nub', I'm also going to machine a groove at o"clock so I can slide it past the buffer detent without having to depress it. The buffer will catch it anyways, it will make it a much easier to install.
If I spill the beans on what I wound up using for a spacer, they wont post my reveiew.
Maybe its the Palmetto State Armory pistol buffer tube, but I dought it.
Posted by Unknown on 13th Feb 2015
Absolutely took care of bolt over-travel in a 9mm AR, ending the bolt hold open breakage. I combined it with a heavy buffer which also served to slow the bolt travel. Well worth the few bucks.
Showing reviews 1-10 of 14 | Next
All prices are in USD